GT35 GTX3582 Billet Wheel Turbo .82 A/R T4 Vband Turbine Housing Anti-Surge USA
Journal Bearing Billet Wheel Turbo with specs as follows:
Billet Compressor wheel: 63.5mm/84mm
Compressor Housing: 0.7 A/R Anti-Surge, 4" Inlet, 2.5" Outlet
Turbine wheel: 68mm/62.3mm
Turbine housing: T4 Inlet, V-Band outlet(ID roughly 3'', OD roughly 3.5''), A/R 0.82
Fit Vehicle: Universal turbo for performance use, racing car etc.
Fit engine displacement 2.0-4.5L and typically good for around 600HP. Fit engine displacement 4.0-8.0L
for twin turbo applications and up to 1200HP.
Recomanded boost presure are 0.5Bar(7psi) to 1.5Bar(21psi), if boost presure higher than 2Bar,
it will significantly reduce the turbo lifespan and may result in damaging of you engine .
By using forged billet aluminum and machined on a 5-Axis mill, the billet compressor wheel can be designed much more aggressively, the nose and hub can be designed significantly smaller to allow for a greater blade diameter. And the blades can be made much more complicated to increase blade surface area, which can flow more air into the engine. By using forged billet aluminum, the wheel can be machined much thinner. This allows the wheel to have a greater efficiency range, because their is less blade thickness to contact the air and heat it up. It also means that with less blade thickness and lower hub area that there is a greater area in-between the blades to squeeze more air and build boost pressure. The more efficient a wheel is the lower the intake temps, and everyone knows the cooler
Product Disclaimer:
Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s
emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition
non-emissions controlled vehicles only and may never be used on a public road or highway.
Using our products for street/road use on public roads or highways is prohibited by law unless a specific
regulatory exemption exists (more information can be found on the SEMA Action Network website
www.semasan.com/emissions
for state-by-state details in the USA).
CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.
Official Air Resource Board Link:
ARB State Adoption Link
Customer Responsibility: It is the responsibility of the installer and/or user of this
product to ensure compliance with all applicable local and federal laws and regulations. Please check with
your local vehicle authority before purchasing, using, or installing any of our products.
By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the
terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as
necessary.
