Billet Wheel Dual Ball Bearing Turbo GT35 GTX3582R T3 82 A/R Vband Clamp 4 Bolt

$559.95

*** IMPORTANT NOTE: Order processing can take up to 3 business days. Shipping timeframes start after the order processing has been completed. ***

Billet Wheel Dual Ball Bearing Turbo GT35 GTX3582R T44 .82 A/R Vband Clamp 4 Bolt

Specification:

Billet Compressor wheel 63.5mm/84mm

Compressor Housing 0.7 A/R Anti-Surge, 4 Inlet, 2.5 Outlet

Turbine wheel 68mm/62.3mm

Stainless Steel Turbine housing V Band Inlet, V-Band Outlet(ID roughly 3, OD roughly 3.5), A/R 0.82

Fit Vehicle: Universal turbo for performance use, racing car, etc.

Fit engine displacement 2.0-4.5L and typically good for around 600HP. Fit engine displacement 4.0-8.0L

for twin turbo applications and up to 1200HP.

Recommended boost pressure are 0.5Bar(7psi) to 1.5Bar(21psi), if boost pressure than 2Bar,

it will significantly reduce the turbo lifespan and may result in damage to your engine.

What can you benefit from our Dual Ball Bearing turbocharger?

Reduced Turbo Lag:

Dual Ball Bearing turbochargers can spool up about 15% faster than traditional journal bearings, so it will significantly reduce the turbo lag when the throttle is suddenly opened. This produces an improved response that can be converted to a quicker 0-60 mph speed. In fact, when you drive with a dual ball-bearing turbocharged engine, it will be more like driving a big, normally aspirated engine.

Reduced Oil Flow:

The Dual Ball Bearing design reduces the required amount of oil required to provide adequate lubrication. This lower oil volume reduces the chance of seal leakage. Also, the dual-ball bearing is more tolerant of marginal lube conditions and diminishes the possibility of turbocharger failure upon engine shut down.

Improved Rotordynamics and Durability:

The Dual Ball Bearing cartridge gives better damping and control over shaft motion, allowing enhanced reliability for both everyday and extreme driving conditions. In addition, the opposed angular contact bearing cartridge eliminates the need for the thrust bearing commonly a weak link in the turbo bearing system.

What can you benefit from our Forged Billet Compressor Wheel?

Stronger Wheel:

By using forged billet aluminum to make the wheel, there is no chance of minute air bubbles being in the mind. So, you don't need to worry about porosity issues. That means a billet compressor wheel is much stronger than a cast compressor wheel.

Better Blades Design:

By using forged billet aluminum and machined on a 5-Axis mill, the billet compressor wheel can be designed much more aggressively, and the nose and hub can be designed significantly smaller to allow for a greater blade diameter. And the blades can be made much more complicated to increase blade surface area, which can flow more air into the engine.

Lower Engine Intake Air Temperature:

By using forged billet aluminum, the wheel can be machined much thinner. This allows the wheel to have a greater efficiency range because there is less blade thickness to contact the air and heat it up. It also means that with less blade thickness and lower hub area that there is a greater area in-between the blades to squeeze more air and build boost pressure. The more efficient a wheel is the lower the intake temps, and everyone knows the cooler the air going into the engine the more horsepower you can make!

Listing and template services provided by inkFrog

Warranty	1 Year
Surface Finish	Cast Aluminum
Fitment Type	Performance/Custom
Brand	JackspaniaRacing
Manufacturer Part Number	Does Not Apply
UPC	Does not apply
Placement on Vehicle	Left
Placement on Vehicle	Right
Placement on Vehicle	Front
Placement on Vehicle	Rear
Placement on Vehicle	Upper
Placement on Vehicle	Lower
Type	Turbo Charger

Product Disclaimer:

Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway.

Using our products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state-by-state details in the USA).

CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.

Official Air Resource Board Link: ARB State Adoption Link

Customer Responsibility: It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using, or installing any of our products.

By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as necessary.

We Also Recommend

Shipping Insurance

1.8T 3" Catless Downpipe | MK4 VW GTI Jetta Golf | AWW, AWP, AWD

~~Regular price $195.00~~ Save $85.05

O2 Oxygen Sensor Short Spacer Pair x2

5 piece Resistor Kit N75 N80 N112 N249 VVT MK4 1.8T, B5 2.7T, B6 1.8T

~~Regular price $29.95~~ Save $4.95

1.8T 3" Catless Exhaust System + Downpipe MK4 VW GTI Jetta Golf GLI

~~Regular price $395.50~~ Save $110.50

Arabic	Hebrew	Polish
Bulgarian	Hindi	Portuguese
Catalan	Hmong Daw	Romanian
Chinese Simplified	Hungarian	Russian
Chinese Traditional	Indonesian	Slovak
Czech	Italian	Slovenian
Danish	Japanese	Spanish
Dutch	Klingon	Swedish
English	Korean	Thai
Estonian	Latvian	Turkish
Finnish	Lithuanian	Ukrainian
French	Malay	Urdu
German	Maltese	Vietnamese
Greek	Norwegian	Welsh
Haitian Creole	Persian

Billet Wheel Dual Ball Bearing Turbo GT35 GTX3582R T3 82 A/R Vband Clamp 4 Bolt

Product Disclaimer:

We Also Recommend

😍 Handpicked Recommendations