10-100 PSI Adjustable FMU

  • $69.90
  • Save $30.00


*** IMPORTANT NOTE: Order processing can take up to 3 business days. Shipping timeframes start after the order processing has been completed. ***

  • ALL SPA Turbo components are GUARANTEED ethanol.
  • (E 85& E 100)  AND  methanol compatible. 
  • Who else can guarantee this? NOBODY!
  • SPA Turbo Composite 14:1 FMU
  • Up to 14:1 adjustable gain rate 
  • FMU = fuel management unit
  • SPA composite  Fuel Management Unit 
  • Lightweight and virtually in-destructible.
  • Ethanol and Methanol compatible and SAFE  
  • Easy installation
  • FMU has a adjustable, boost referenced 1:14 raising rate
  • Fine tune the fuel pressure that your motor will need while under turbo - boost.
  • 8mm inlet and 8mm outlet fuel ports  
  • 1/4" boost reference port
  • Adjustable from 10 psi to 100 psi fuel pressure 
  • All SPA Turbo FMUs can also be used as fuel pressure regulators. 
  • In other words, if you need a fuel pressure regulator, and are thinking of later upgrading to a turbo system, save money and get The FMU instead of just the FPR.  
  • We've had a few questions about how these work, so here's clarification: 

 

  • Initial line pressure is adjustable from 10 psi to 100 psi - boost referenced fuel pressure increase is also adjustable. 
  • The boost referenced pressure increase is adjustable from 1:1 to 14:1 meaning that the fuel pressure will increase proportionally with an increase in boost.
  • Here's 2 examples: 
  • If you are running 10 lbs of boost and 1:1 ratio, your fuel pressure will increase by 10 psi. 
  • If you increase the boost referenced ratio to 14:1, your fuel pressure will  increase by 140 psi. 
  • If your initial fuel pressure is adjusted to 100 psi, your total pressure in the first example would be 110 psi and 240 psi in the second example. However, 240 psi would require a heavy duty fuel pump. 

 

  • Allows perfect fixation of the fuel pressure regulator in the desired location.
  • Fits all SPA Turbo fuel pressure regulator.
  • Can also be used on other fuel pressure regulator with fixing holes as described in the "Technical Drawings" tab.
  • Made of high quality galvanized steel.

 


Product Disclaimer:

Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway.

Using our products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state-by-state details in the USA).

CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.

Official Air Resource Board Link: ARB State Adoption Link

Customer Responsibility: It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using, or installing any of our products.

By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as necessary.


We Also Recommend

😍 Handpicked Recommendations

Bundle Offers from Addly