Racing Coilover Suspension Shocks Kits Lexus 07-11 GS350 06-13 IS250 IS350 lowering kit
Introduction
A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened - lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper and a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Lexus series. You can enjoy a comfortable riding experience in all road conditions.
Application
Compatible for Lexus IS 250 / IS350 RWD 2nd Gen. 2006-2012
Compatible for Lexus GS350 RWD 2007-2011
Compatible for Lexus GS430 RWD 2007-2011
RWD Only, not fit for AWD
Specification
MaXpeedingrods Coilover kit is simply great for daily driver.
1.Product included: Complete coilovers 2 front and 2 rear, a pair wrench for height adjustment .
2.Adjustable Camber Plate: NO.
3.Adjustable Damper: 24 ways Adjustable Damper.
4.Spring rate: Front: 12 kg/mm (672 in/lbs) ;Rear: 9 kg/mm (504 in/lbs).
5.Adjustable height: Yes, lowering 1'' to 3''.
6.Shock type: Twin tube.
7.Spring Preload: 7-10 mm.
8.Color: Red.
9.Warranty: one year.
Features
- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.
- Coilovers are 24-way adjustable. Rebound and Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.
- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel and response.
- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency and keep shock temps low.
- Height adjustment does not sacrifice damper stroke length.
- These coilovers are able to have their height adjusted without being taken out of the car.
- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength and rigidity.
- High Tensile strength performance spring---Tested under a 600,000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability and performance.
- Adjustment tools included in the kit.
Notice
- No instruction included; Professional installation & alignment suggested.
- Please check your car information before purchase. If you are not sure, please contact us for help！
- No drilling, cutting, or modification necessary.
SPECIAL NOTES: Prior to installation, verify all hardware and properly tighten.
Product Disclaimer:
Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway.
Using our products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state-by-state details in the USA).
CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.
Official Air Resource Board Link: ARB State Adoption Link
Customer Responsibility: It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using, or installing any of our products.
By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as necessary.
