Adjustable Front Tension Rod+Rear Camber+Toe+Traction Arm Kit,Front + Rear Traction TIE TOE Camber Control Arm Kit ForNissan 240SX S13 Silvia89-94

Note

Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
Make sure the oil drain line is lower than the turbo itself.
Ensure exhaust outlet are well sealed by welding
The degree of modification of the universal turbo depends on your individual vehicle.Professional installation is highly recommended.
This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!
Need modifications - Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, and it's recommended to advanced players but not for beginners. )

Application

Universal Turbo Kit Perfect For 1.5L-3.0L engine
This Kit Will be able to add 350+HP at 7.5-14.5 PSI.
(You will need Turbo Manifold, Modification and other accessories to complete
the Turbo Kit Project)

Notice:Please confirm that your vehicle displacement is 1.5L-3L before purchasing. Otherwise, if you buy the wrong one, you will not be able to use it normally.

Specification

Turbine Side:
Exhaust Inlet Flange: T3 T4 4 bolt Flange Patterns
Exhaust Outlet pipe Flange: 5 bolt Flange
Turbine Trim: 74.2
Turbine Inducer Diameter: 64.8 mm
Turbine Exducer Diameter: 55.8mm
Turbine A/R: 0.63
Compressor Side:
Compressor Trim: 48.1
Compressor Inducer Diameter: 52.7mm
Compressor Exducer Diameter: 76 mm
Compressor A/R: 0.5
Compressor Inlet Diameter: 72mm(2.8")
Compressor Outlet Diameter: 53mm（2"）

Bearing Type: Wet Float Bearing
Cooling Type:Oil Cooling
Thrust Bearing:270 degree
Horsepower:Up to 400HP
Oil Inlet: 1/8 NPT
Turbo Type:Individual
Condition: New
Accessories: You will get exactly as shown as picture above

Other specification in the kit :
1 x Intercooler: Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch.
Support up to 350 hp for this small intercooler size - tube and fin style .
Intercooler core size: 2172.5
1 x Universal turbo intercooler piping kit including:
2 x Straight Aluminum Pipe
2 x 45°Aluminum Pipe
2 x 75°Aluminum Pipe
2 x 90°Aluminum Pipe
6 x 2.5" Straight Silicon Hose (Blue)
2 x 2.5" 90 Degree Hose (Blue)
16 x 2.5" Stainless Steel T-Clamp
1 x Type-S Blow Off Valve: 2.5" Inch Type S/Rs Flange Pipe. 25PSi Boost!
1 x BOV pipe: can install anywhere suitable
1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit
1 x Turbo Boost Gauge: 2" (52mm) Turbo Boost Meter Gauge.
1 x Turbo Boost Controller:
1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo.
1x 5 Bolt pipe: 2.5" t3/t4 5-bolt stainless steel TIG welded pipe. pipe length: 13“

Package Size:94x 46 x 45 cm
Package Weight: 24600g

Package included

1x Turbocharger
1x Oil Feed / Return Line
1x 35/38mm Wastegate
1x 5 Bolt Turbo pipe
1x Turbo Boost Gauge
1x Turbo Intercooler
1x Tubo Boost Controller
1x Type-S Blow Off Valve(Random Color)
1x BOV Adapter/pipe
1x Turbo Piping Kit
1x Manual
1x Brochure
1x Sticker

Feature

1.Turbo charger:
Turbine housing ：Ductile iron QT450-10 - temperature resistant up to 700℃
Steel turbine wheel：K418 alloy - high oxidation stability and resistance up to 900℃
Compressor housing：ZL104 aluminum with lightweight
Compressor wheel/blades：Cast aluminium blades – superior air tightness & corrosion resistance
Product Performance
Cost-effective turbo increase 20-40% power for your car
Rich experience in turbo production and own factory
High-Speed oil seal ring and Precision clearance
Built for durability and strength
Technology Advantage:
100% balancing Test by TURBOTECHNICS VSR3
G3-min-Flow VNT Turbo testing
Advanced Actuator Tester/Programmer
2\. Intercooler
core size:2172.5 cools down the turbocharged air efficiently
Lightweight aluminum racing intercooler，
Strong TIG welds will support high PSI levels
3.Boost controller
Can be setup to adjust boost PSI on the fly
Can be adjusted for any PSI level desired
Control your boost with a precise click
Includes complete install kit
Anodized aluminum finish
CNC machined design
4\. Intercooler piping kit
Made of 6061 aluminum
Lightweight yet strong aluminum piping
High pressure silicone couplers and T-bolt clamps
5\. Turbo Oil returen /Feeding line kit
Stainless Steel Braided
Includes complete install kit
It helps circulate oil from the turbo charger to the oil pan.
The kit provides a anodized look
gives a best cooling performance on your turbo and long lasting life.
6.Blow Off Valve Kit
CNC Billet Aluminum Type RS Style Blow off Valve
Easy Mount Piping Set Included For Bolt-On.
Including all necessary hardwares.
easily adjustable to prevent both permature boost leakage and compressor surge.
Fast response One For Low And High Boost Pressure.
Performance design produces a powerful and aggressive sound
Quality design will not leak under high boost conditions
Flanges can be installed at user discretion
7\. 38MM Wastegate
Most reliable wastegates For competition vehicles.
accurate boost control
high quality appearance features Dual port design
comes with waste gate spring (fully adjustable, up to 15 psi), allow you to add the spring to get desired high psi.
8\. 5 Blot Turbo pipe
CNC machined surface
Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing.
9\. BOV pipe/Adapter
can install anywhere suitable
10.Turbo Boost Gauge
Red LED Illuminated Needles.
Comes with All the Wiring Necessary for Installation.
All Accessories are Included for Installation.
Accurately monitor boost pressures from the turbo system
Back lit for use at night time