Turbo Charger Water Cooled Nissan Skyline R32 R33 R34 GTT RB25DET T3 430BHP
Application
Directly bolt on compatible for Nissan Skyline R32 R33 R34 2.0L-2.5L RB20DET
RB25DET engine
For some R33 models few modifications may be required(A direct Bolt on turbo upgrade for RB20DET and RB25DET for Skyline Engines!
Will require a coupler to connect turbo to hotpipe but other than that its a
OEM Bolt on with upgrade 3" air inlet and larger wheels for optimum power. )
Specification
Exhaust Inlet Flange: T3 Flange
Exhaust Outlet Flange: 6-Bolt Flange
Turbine Side:
Turbine Inducer Diameter: 64.4mm
Turbine Exducer Diameter: 47.9mm
Turbine Trim: 55.3
Turbine A/R: 0.63
Compressor Side:
Compressor Inducer Diameter: 52.7 mm
Compressor Exducer Diameter: 76mm
Compressor Trim: 48.1
Compressor A/R: 0.50
Internal Wastegate: Yes
Bearing: Wet Float
Thrust Bearing:270 degree
Cooling Type: Water + Oil cooling
Turbo Type: Individual
Oil Inlet: M121.25
Side hole: M81.25
Oil Return: 18
Side hole:M81.25
Center-center: 50.8
Water Hole: M181.5
Horse Power: Boost Horse Power up to 500BHP
Condition:New
Accessories: You will get exactly as picture shown
Package Size:26x25x23 cm
Package Weight: 7920g
Package included
1xTurbocharger
1xFlange gaskets
2xOil/Water port gaskets
1xBolt
1xManual
1xBrochure
1xSticker
Feature
Product Material
1\. Turbine housing ：Ductile iron QT450-10 - temperature resistant up to 700℃
2\. Steel turbine wheel：K418 alloy - high oxidation stability and resistance
up to 900℃
3\. Compressor housing：ZL104 aluminum with lightweight
4\. Compressor wheel/blades：Cast aluminium blades – superior air tightness &
corrosion resistance
Product Performance
1\. Cost-effective turbo increase 20-40% power for your car
2\. Rich experience in turbo production and own factory
3\. High-Speed oil seal ring and Precision clearance
4\. Built for durability and strength
Technology Advantage:
1\. 100% balancing Test by TURBOTECHNICS VSR3
2\. G3-min-Flow VNT Turbo testing
3\. Advanced Actuator Tester/Programmer
Note
Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
Make sure the oil drain line is lower than the turbo itself.
Gasoline car must install a water cooling device to avoid overheating.
Ensure exhaust outlet are well sealed by welding
The degree of modification of the universal turbo depends on your individual vehicle.Professional installation is highly recommended.
This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!
Product Disclaimer:
Emissions Equipment Tampering Warning: In many states, tampering with your vehicle’s emissions equipment is unlawful. Our products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway.
Using our products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state-by-state details in the USA).
CARB-Restricted Areas: CARB-Restricted products, will not be shipped to state of California under any circumstatences.
Official Air Resource Board Link: ARB State Adoption Link
Customer Responsibility: It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using, or installing any of our products.
By proceeding with the purchase and use of our products, customers affirm their commitment to adhere to the terms outlined in this comprehensive product disclaimer. We reserve the right to update this disclaimer as necessary.
